When it comes to outdoor furniture, teak is one of the most durable and stylish options. Its natural oils make it resistant to water, weather, and wear. However, over time, the finish on teak patio furniture can wear off, leaving it looking dull and outdated. Fortunately, removing the finish from teak patio furniture can be done fairly easily. In this article, we’ll provide step-by-step instructions on how to remove a finish from teak patio furniture, so you can restore it to its original beauty.
Step 1: Clean the Furniture
The first step in removing a finish from teak patio furniture is to clean it. Use a mild soap and warm water to remove dirt, dust, and debris. You may also want to use a pressure washer to get into any hard-to-reach areas. Be sure to wear safety glasses and gloves to protect your eyes and skin from the water pressure.
Step 2: Prepare the Area
Next, you’ll need to prepare the area around the furniture. Cover any nearby plants or shrubs with a tarp to protect them from the chemicals you’ll be using. Then, lay down some old newspapers to catch any drips. Make sure the area is well-ventilated, as the fumes from the chemicals can be quite strong.
Step 3: Apply Stripper
Now it’s time to apply the stripper. There are several types of chemical strippers available, so make sure you read the directions carefully before using. Begin by applying the stripper in an even layer using a paint brush. Wait for the stripper to dry, then scrape off the old finish with a putty knife. Repeat this process until all of the finish has been removed.
Step 4: Sand the Furniture
Once all of the finish has been removed, it’s time to sand the furniture. Start with a medium-grit sandpaper and work your way up to a fine-grit. Be sure to sand in the direction of the wood grain to avoid creating any scratches or gouges. When you’re finished, be sure to vacuum up any dust or debris.
Step 5: Apply Oil
Finally, you’ll need to apply oil to the furniture in order to protect it from the elements. Teak oil is the best option, as it will nourish the wood and help to retain its natural color. Apply the oil in an even layer and let it soak in for a few hours before wiping off any excess. You may need to repeat this process a few times in order to get the desired results.
Image Ideas List
Cleaning the furniture
Preparing the area
Applying stripper
Sanding the furniture
Applying oil
Finished product
Before and after
Close-up
Tools and materials
Safety gear
If you need any product of Teak Furniture, perhaps we can assist and made particularly for you, don’t hesitate to Contact Us related to our Products and Services.